Choosing Equipment That Works With Your Cleaning Routine
Choosing Equipment That Works With Your Cleaning Routine
Hospitals spend a great deal of effort choosing equipment for what it does and very little on how it will be cleaned. Yet cleaning shapes how long equipment lasts, how fast rooms turn around, and how confident staff feel using it. A device that performs well but is awkward to clean, or that is damaged by the products your facility uses, becomes a daily frustration and sometimes a safety concern.
Cleaning and disinfection requirements depend on the equipment, your facility’s infection control policy, and the manufacturer’s instructions, and those always take priority. This article is about asking the right questions early so cleaning is part of the decision, not a surprise afterwards.
Start with your own routine
Before looking at equipment, write down how cleaning works in the area where it will be used. Which products does your facility use? How often is each type of surface cleaned? How much time is available between patients? Who does the cleaning, and what training do they have? Without this baseline, you can’t judge whether a device will fit.
Involve the people who clean
Cleaning and infection control staff know things designers often miss: where dirt collects, which joints are hard to reach, which materials stain or crack. Ask them to review candidate equipment, ideally hands-on. Their comments are often the most practical advice you’ll get.
Ask for the manufacturer’s cleaning instructions before you buy
Every device should come with written guidance on how it may be cleaned and which products are suitable. Ask for it at the quotation stage, not at delivery. Compare it against your routine: are the approved products ones your facility uses? Are the steps realistic in the time available? If the instructions require products or procedures you don’t use, you need to know now.
Look at the design
Several design features affect how easily something is cleaned:
- Surfaces. Smooth, continuous surfaces are generally easier to wipe than textured ones with grooves.
- Joints and seams. Fewer gaps and crevices mean fewer places for residue to collect.
- Moving parts. Check whether parts that move can be cleaned in all positions, or whether cleaning requires removal.
- Cable and hose management. Tangled or exposed cables are harder to clean around.
- Fabric and upholstery. Check the material, the seams, and whether covers can be removed or cleaned in situ.
- Controls and screens. Check that touch areas can be cleaned without triggering functions or causing damage.
- Accessories. Detachable items need their own cleaning method, and storage so they aren’t lost.
Ask to see the device and run a cleaning cloth along it. Notice what snags, where fluid could run, and what you can’t reach.
Ask about durability under cleaning
Frequent cleaning is hard on materials. Over months, products can fade labels, cloud screens, dry out seals, or weaken coatings. Ask the supplier how the device is expected to perform after repeated cleaning with your products, and whether they have examples from similar facilities. A hospital equipment supplier in UAE that works with many clinical customers should be able to share experience about which materials and finishes hold up, and which parts tend to wear.
Think about turnaround time
In busy areas, minutes matter. Work out how long cleaning the device takes, step by step, and how that fits within your turnaround target. If a device needs complex disassembly or a long contact time with a product, build that into your schedule. A small time cost per patient adds up over a year.
Consider storage and handling
Where will the equipment sit when it isn’t in use, and how will it be kept clean? Can it be stored away from dust and splashes? Can accessories be kept with it? Equipment that is difficult to store properly tends to end up in corridors.
Plan training
Staff who clean equipment need clear instructions. Ask the supplier for a short cleaning guide or demonstration as part of training, and include cleaning staff, not only clinicians. Add a one-page cleaning card to the equipment, or keep it nearby, following the manufacturer’s guidance and your policy.
Test before you commit
For significant purchases, ask for a demonstration unit and run a trial in your own area. Clean it your usual way, over a few days, and record what happens. Ask the cleaning team what they think. If a trial isn’t possible, visit a facility that already uses the equipment.
Check compatibility with disinfectant changes
Facilities sometimes change cleaning products, because of supply, policy, or new guidance. Ask how a device’s instructions would cope with a change. If your policy might change in the next few years, check that the equipment isn’t tied to one product.
Keep records
Note the cleaning method approved for each device, the products used, and any issues found. If a problem appears, such as cracking or discolouration, record it and tell the supplier promptly with photographs. Patterns help you identify whether the cause is the product, the method, or the equipment.
A short checklist
- Do we have the manufacturer’s cleaning instructions?
- Are the approved products ones we use?
- Can the device be cleaned in the time available?
- Are there crevices, seams, or hard-to-reach areas?
- How does it hold up after repeated cleaning?
- Have cleaning and infection control staff reviewed it?
- Is cleaning included in training?
Conclusion
Making cleaning part of the purchase decision saves time, protects equipment, and keeps staff confident. Involve cleaning and infection control early, ask for written instructions, examine the design, and test in your own routine. Modern Pulses Trading MPT works with UAE hospitals and clinics across infrastructure, operation theatre equipment, and consumables, and is glad to share manufacturer cleaning guidance for specific items before you order.

Comments
Post a Comment